| 11.25.1800.000.11.1503 Standard 5 Slewing Ring Bearings | Grease Speed Rating Open/Shielded n1:3600 rpm; B:45.00 mm; d:75.000 mm; Oil Speed Rating Open/Shielded n2:4300 rpm; Sealed Speed Rating n3:2500 rpm; Fillet Radius ra:2.50 mm; Basic Dynamic Radial Load Rating C:153000 N; Accessories:One Shield; D:190.0000 mm; Basic Static Radial Load Rating Co:114000 N; |
| 62.30.1600.001.21.1504 Standard 5 Slewing Ring Bearings | A2:215.9 mm; P150°:136 kN; RG:3/4 NPT; Cap bolt recommended tightening torque:813.5 N·m; Da:269.999 mm; da:130.175 mm; P120°:149 kN; PG:1/4 NPT; S:4.763 mm; R2:39.688 mm; ba:65.088 mm; Initial grease fill:623.7 g; Eye bolt:2 x 3/8-16 UNC; P90°:236 kN; End plug (suffix Y):EPR 16; Max. speed for PosiTrac Plus seal:1075 r/min; Cap bolt:7/8-9 UNC; Ca:82.804 mm; P180°:162 kN; Labyrinth ring:2 x LOR 124; |
| 62.40.1700.007.19.1503 Standard 5 Slewing Ring Bearings | Bearing limiting speed:3800 r/min; RG:1/2 NPT; Pa:20.7 kN; J1:69.85 mm; P90°:111 kN; Initial grease fill:379.89 g; Housing:SAF 524; PG:1/4 NPT; H:257.175 mm; Mass pillow block:47.2 kg; P120°:72.5 kN; Cap bolt, SAE grade:5; h:46.831 mm; R2:30.163 mm; R1:79.375 mm; H1:133.35 mm; Appropriate attachment bolt size G:0.75 in; Da:215.001 mm; P60°:185 kN; A2:187.325 mm; |
| 282.30.1100.013 Type 110/1300.2 Standard 5 Slewing Ring Bearings | A1:98.425 mm; Cap bolt recommended tightening torque:149.1 N·m; Mass pillow block:21.3 kg; N1:19.05 mm; Cap bolt, SAE grade:5; Labyrinth ring:2 x LOR 186; A2:149.225 mm; R1:60.325 mm; Da:160 mm; P150°:34.7 kN; Appropriate attachment bolt size G:0.625 in; P180°:42.3 kN; PG:1/8 NPT; J min.:263.525 mm; H:192.484 mm; h:38.1 mm; H1:101.6 mm; Housing:FSAF 518; P90°:60.9 kN; Cap bolt:2 x 5/8-11 UNC; |
| 232.20.0900.013 Type 21/1050.2 Standard 5 Slewing Ring Bearings | Oil Speed Rating n2:3600 rpm; Accessories:One Seal; Sealed Speed Rating n3:2000 rpm; Grease Speed Rating Open/Shielded n1:3000 rpm; Basic Static Radial Load Rating Co:118000 N; B:38.00 mm; Grease Speed Rating n1:3000 rpm; d:110.000 mm; Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating C:143000 N; Oil Speed Rating Open/Shielded n2:3600 rpm; D:200.0000 mm; |
| 281.30.1100.013 Type 110/1300.1 Standard 5 Slewing Ring Bearings | Cap bolt, SAE grade:5; S:4.763 mm; Initial grease fill:141.75 g; P120°:38.3 kN; PG:1/8 NPT; L:349.25 mm; P180°:42.3 kN; A1:98.425 mm; RG:3/8 NPT; H:192.484 mm; H2:41.275 mm; End plug (suffix Y):EPR 11; P150°:34.7 kN; N1:19.05 mm; Ca:49.809 mm; Labyrinth ring:2 x LOR 187; R1:60.325 mm; Bearing limiting speed:5300 r/min; J min.:263.525 mm; Cap bolt:2 x 5/8-11 UNC; |
| 161.36.1800.891.41.1503 Standard 5 Slewing Ring Bearings | d:45.000 mm; Accessories:One Seal; D:58.0000 mm; Grease Speed Rating Open/Shielded n1:9500 rpm; B:7.00 mm; Basic Static Radial Load Rating Co:5100 N; Fillet Radius ra:0.30 mm; Oil Speed Rating Open/Shielded n2:12000 rpm; Sealed Speed Rating n3:6700 rpm; Basic Dynamic Radial Load Rating C:6050 N; |
| 191.20.1250.990.41.1502 Standard 5 Slewing Ring Bearings | Thread grub screw G2:1/4-28 UNF; Basic static load rating C0:11.2 kN; Mass bearing unit:0.48 kg; B4:5 mm; B:38.1 mm; Fatigue load limit Pu:0.475 kN; Basic dynamic load rating C:19.5 kN; Limiting speed with shaft tolerance h6:3800 r/min; s1:22.2 mm; Bearing:YAR 206-103-2RF/VE49; L1:76 mm; J1:31.8 mm; Recommended tightening torque for grub screw:4 N·m; N:10.7 mm; Recommended diameter for attachment bolts, inch G:0.375 in; |
| 61.25.0955.575.11.1403 Standard 5 Slewing Ring Bearings | Basic Static Radial Load Rating Co:93000 N; Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating C:88400 N; D:210.0000 mm; d:150.000 mm; Grease Speed Rating Open/Shielded n1:2800 rpm; B:28.00 mm; Sealed Speed Rating n3:1800 rpm; Oil Speed Rating Open/Shielded n2:3400 rpm; Accessories:Two Shields; |
| 162.25.0980.891.21.1503 Standard 5 Slewing Ring Bearings | d3 max.:220.802 mm; Sleeve:S 3038x7; Hydraulic nut:HMVC 38E; G:189.789 mm; d1:177.8 mm; B:28.829 mm; B4:31.75 mm; Mass adapter sleeve assembly:7.5 kg; Threads per inch:8; d:190 mm; B1:111.811 mm; |
| 162.36.1900.890.11.1503 Standard 5 Slewing Ring Bearings | ba max.:238 mm; N:60 mm; H1:410 mm; Cap bolt, size:M 42x280; N1:48 mm; Q180°:2900 kN; P180°:3800 kN; Initial grease fill, 40%:18.5 kg; bc:243.5 mm; End cover:ETS 96; Taconite seal:2 x TK 96; Labyrinth seal:2 x TS 96; H:810 mm; P90°:4600 kN; J6:1070 mm; Locating ring:2 x FRB 29.5/700; Eye bolt, size:2 x M 42; ATK:590 mm; P150°:3000 kN; Appropriate attachment bolt, size G:42 mm; |
| 282.30.1275.013 Type 110/1400.2 Standard 5 Slewing Ring Bearings | P90°:81.4 kN; PG:1/4 NPT; H2:44.45 mm; L:387.35 mm; h:42.069 mm; Ca:55.804 mm; ba:38.894 mm; Cap bolt recommended tightening torque:203.4 N·m; H:217.488 mm; PosiTrac Plus contact element:2 x B10724-102; Housing:SAF 520; N1:25.4 mm; Da:180 mm; Cap bolt, SAE grade:5; Pa:10.2 kN; P150°:46.3 kN; Cap bolt:2 x 3/4-10 UNC; P180°:55.6 kN; J max.:333.375 mm; J min.:295.275 mm; |
| 62.20.0944.500.01.1503 Standard 5 Slewing Ring Bearings | Specific dynamic load factor K:10 N/mm²; Tolerance shaft:h8; Permissible sliding velocity v max.:5 m/s; B1:5 mm; d:45 mm; Mass bushing:0.2 kg; Coefficient of friction µ max.:0.1; D:55 mm; Specific static load factor K0:20 N/mm²; D1:65 mm; B:35 mm; Permissible sliding velocity v min.:0.25 m/s; Coefficient of friction µ min.:0.05; Tolerance housing:H7; |
| 61.25.0980.891.21.1503 Standard 5 Slewing Ring Bearings | Coefficient of friction µ min.:0.08; Tolerance housing:H7; Permissible sliding velocity v min.:0 m/s; D1:125 mm; d:95 mm; h:96.5 mm; B1:8 mm; a:4 mm; D:115 mm; α:124 °; B:80 mm; Specific dynamic load factor K:25 N/mm²; Specific static load factor K0:45 N/mm²; Tolerance shaft:e7; Permissible sliding velocity v max.:0.5 m/s; Coefficient of friction µ max.:0.15; Mass bushing:2.33 kg; |
| No. | Brand | C | s | a | K | F | N | H | U |
| 91.25.1502.991.21.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 92.30.1607.990.11.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 11.25.1800.000.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 12.20.1360.000.11.1504 | Standard 5 | - | - | - | - | - | - | 222.25 mm | - |
| 280.30.1100.013 Type 110/1300. | Standard 5 | - | - | - | 9 mm | - | - | - | - |
| 62.20.0944.575.01.1403 | Standard 5 | - | - | - | - | - | - | - | - |
| 230.20.0900.013 Type 21/1050. | Standard 5 | - | - | - | - | - | - | - | - |
| 162.28.1400.891.21.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 62.40.1700.007.19.1503 | Standard 5 | - | - | - | - | - | - | 257.175 mm | - |
| 282.30.1275.013 Type 110/1400.2 | Standard 5 | - | - | - | - | - | - | 217.488 mm | - |
| 62.50.1800.001.49.1504 | Standard 5 | - | - | - | - | - | 12.3 mm | 124 mm | - |
| 231.20.0900.013 Type 21/1050.1 | Standard 5 | - | - | - | - | - | - | 157.162 mm | - |
| 280.30.1475.013 Type 110/1600. | Standard 5 | - | - | - | - | 1258 mm | - | - | - |
| 12.20.1360.001.21.1504 | Standard 5 | 100 mm | - | - | - | - | - | - | - |
| 61.25.1255.575.11.1403 | Standard 5 | - | - | - | - | - | - | - | - |
| 62.25.1355.575.11.1403 | Standard 5 | - | - | - | - | - | - | - | - |
| 281.30.1375.013 Type 110/1500.1 | Standard 5 | 33.325 mm | - | - | - | - | - | - | - |
| 230.20.1000.013 Type 21/1200. | Standard 5 | - | - | - | - | - | - | - | - |
| 161.25.1250.890.11.1503 | Standard 5 | - | - | - | 12 mm | 1032 mm | - | - | - |
| 60.25.1155.575.11.1403 | Standard 5 | - | - | - | - | - | - | - | - |
| 282.30.0975.013 Type 110/1100.2 | Standard 5 | - | - | - | - | - | - | - | - |
| 280.30.1200.013 Type 110/1400. | Standard 5 | - | - | - | - | - | - | - | - |
| 61.30.1500.200.11.1504 | Standard 5 | 19.114 mm | - | 17.057 mm | - | - | - | - | - |
| 282.30.1000.013 Type 110/1200.2 | Standard 5 | - | - | - | - | - | - | - | - |